The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

File::Tail (3)
  • >> File::Tail (3) ( Разные man: Библиотечные вызовы )
  •  

    NAME

    File::Tail - Perl extension for reading from continously updated files
     
    

    SYNOPSIS

      use File::Tail;
      $file=File::Tail->new("/some/log/file");
      while (defined($line=$file->read)) {
          print "$line";
      }
    
    

      use File::Tail;
      $file=File::Tail->new(name=>$name, maxinterval=>300, adjustafter=>7);
      while (defined($line=$file->read)) {
          print "$line";
      }
    
    

    OR, you could use tie (additional parameters can be passed with the name, or can be set using $ref):

        use File::Tail;
        my $ref=tie *FH,"File::Tail",(name=>$name);
        while (<FH>) {
            print "$_";
        }
    }
    
    

    Note that the above script will never exit. If there is nothing being written to the file, it will simply block.

    You can find more synopsii in the file logwatch, which is included in the distribution.

    Note: Select functionality was added in version 0.9, and it required some reworking of all routines. ***PLEASE*** let me know if you see anything strange happening.

    You can find two way of using select in the file select_demo which is included in the ditribution.  

    DESCRIPTION

    The primary purpose of File::Tail is reading and analysing log files while they are being written, which is especialy usefull if you are monitoring the logging process with a tool like Tobias Oetiker's MRTG.

    The module tries very hard NOT to ``busy-wait'' on a file that has little traffic. Any time it reads new data from the file, it counts the number of new lines, and divides that number by the time that passed since data were last written to the file before that. That is considered the average time before new data will be written. When there is no new data to read, "File::Tail" sleeps for that number of seconds. Thereafter, the waiting time is recomputed dynamicaly. Note that "File::Tail" never sleeps for more than the number of seconds set by "maxinterval".

    If the file does not get altered for a while, "File::Tail" gets suspicious and startschecking if the file was truncated, or moved and recreated. If anything like that had happened, "File::Tail" will quietly reopen the file, and continue reading. The only way to affect what happens on reopen is by setting the reset_tail parameter (see below). The effect of this is that the scripts need not be aware when the logfiles were rotated, they will just quietly work on.

    Note that the sleep and time used are from Time::HiRes, so this module should do the right thing even if the time to sleep is less than one second.

    The logwatch script (also included) demonstrates several ways of calling the methods.  

    CONSTRUCTOR

     

    new ([ ARGS ])

    Creates a "File::Tail". If it has only one paramter, it is assumed to be the filename. If the open fails, the module performs a croak. I am currently looking for a way to set $! and return undef.

    You can pass several parameters to new:

    name
    This is the name of the file to open. The file will be opened for reading. This must be a regular file, not a pipe or a terminal (i.e. it must be seekable).
    maxinterval
    The maximum number of seconds (real number) that will be spent sleeping. Default is 60, meaning "File::Tail" will never spend more than sixty seconds without checking the file.
    interval
    The initial number of seconds (real number) that will be spent sleeping, before the file is first checked. Default is ten seconds, meaning "File::Tail" will sleep for 10 seconds and then determine, how many new lines have appeared in the file.
    adjustafter
    The number of "times" "File::Tail" waits for the current interval, before adjusting the interval upwards. The default is 10.
    resetafter
    The number of seconds after last change when "File::Tail" decides the file may have been closed and reopened. The default is adjustafter*maxinterval.
    maxbuf
    The maximum size of the internal buffer. When File::Tail suddenly found an enormous ammount of information in the file (for instance if the retry parameters were set to very infrequent checking and the file was rotated), File::Tail sometimes slurped way too much file into memory. This sets the maximum size of File::Tail's buffer.

    Default value is 16384 (bytes).

    A large internal buffer may result in worse performance (as well as increased memory usage), since File::Tail will have to do more work processing the internal buffer.

    nowait
    Does not block on read, but returns an empty string if there is nothing to read. DO NOT USE THIS unless you know what you are doing. If you are using it in a loop, you probably DON'T know what you are doing. If you want to read tails from multiple files, use select.
    ignore_nonexistant
        Do not complain if the file doesn't exist when it is first 
    opened or when it is to be reopened. (File may be reopened after 
    resetafter seconds have passed since last data was found.)
    
    
    tail
        When first started, read and return C<n> lines from the file. 
    If C<n> is zero, start at the end of file. If C<n> is negative, 
    return the whole file.
    
    

        Default is C<0>.
    
    
    reset_tail
        Same as tail, but applies after reset. (i.e. after the
    file has been automaticaly closed and reopened). Defaults to
    C<-1>, i.e. does not skip any information present in the
    file when it first checks it.
    
    

       Why would you want it otherwise? I've seen files which
    have been cycled like this:
    
    

       grep -v lastmonth log >newlog 
       mv log archive/lastmonth 
       mv newlog log 
       kill -HUP logger
    
    

    Obviously, if this happens and you have reset_tail set to c<-1>, you will suddenly get a whole bunch of lines - lines you already saw. So in this case, reset_tail should probably be set to a small positive number or even 0.

    debug
    Set to nonzero if you want to see more about the inner workings of File::Tail. Otherwise not useful.
    errmode
    Modeled after the methods from Net:Telnet, here you decide how the errors should be handled. The parameter can be a code reference which is called with the error string as a parameter, an array with a code reference as the first parameter and other parameters to be passed to handler subroutine, or one of the words:

    return - ignore any error (just put error message in errmsg). warn - output the error message but continue die - display error message and exit

    Default is die.

     

    METHODS

     

    read

    "read" returns one line from the input file. If there are no lines ready, it blocks until there are.  

    select

    "select" is intended to enable the programmer to simoultaneously wait for input on normal filehandles and File::Tail filehandles. Of course, you may use it to simply read from more than one File::Tail filehandle at a time.

    For an example of usage, look at the script select_demo.

    Basicaly, you call File::Tail::select just as you would normal select, with fields for rbits, wbits and ebits, as well as a timeout, however, you can tack any number of File::Tail objects (not File::Tail filehandles!) to the end.

    When you do this, File::Tail's select emulates normal select, with two exceptions:

    a) it will return if there is input on any of the parameters (i.e. normal filehandles) _or_ File::Tails.

    b) In addition to "($nfound, $timeleft)", the return array will also contain a list of File::Tail objects which are ready for reading. $nfound will contain the correct number of filehandles to be read (i.e. both normal and File::Tails).

    Once select returns, when you want to determine which File::Tail objects have input ready, you can either use the list of objects select returned, or you can check each individual object with $object->predict. This returns the ammount of time (in fractional seconds) after which the handle expects input. If it returns 0, there is input waiting. There is no guarantee that there will be input waiting after the returned number of seconds has passed. However, File::Tail won't do any I/O on the file until that time has passed.

    Also note, if you are determining which files are ready for input by calling each individual predict, the $nfound value may be invalid, because one or more of File::Tail object may have become ready between the time select has returned and the time when you checked it.  

    TO BE DONE

    Planned for 0.95-1.0: Using $/ instead of \n to separate ``lines'' (which should make it possible to read wtmp type files).  

    AUTHOR

    Matija Grabnar, matija.grabnar@arnes.si  

    SEE ALSO

    perl(1), tail (1), MRTG (http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/mrtg.html)


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    CONSTRUCTOR
    new ([ ARGS ])
    METHODS
    read
    select
    TO BE DONE
    AUTHOR
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру